Acer Altos RAIDWatch, Руководство пользователя

Страница: 126 / 212

Altos RAIDWatch User Guide
112
Note If the redundant controller function has not been enabled or the SID's are not assigned on drive
channels, the “LD Assignment” pull down menu will not be available.
Max LD Capacity
This field, shown in Figure 8–43 specifies the maximum amount of memory that will be used from
each LD to create the LV. Note that this field is not user configurable and the maximum amount of
that will be used is determined automatically.
Execute Init
Using the “Execute Init” pull down menu shown in Figure 8–41 the user can select whether the LV
is initialized online or offline.
Select Write Policy
Use the “Write Policy” menu to select either “Default” (Global Setting),” Write Through” or “Write
Back”.
8.3.2.4 Click “OK” to Create LV
Once the logical drives that will be used in the LV have been selected and all the desired LV
parameters have been selected:
1 Click the “OK” button at the bottom of the LV management window shown in Figure 8–38
2 A confirmation window shown inFigure 8–44 will appear. If you are certain that you want to create
the LD with the settings you have selected, click the “OK” button.
Figure 8–42 LV Assignment Selection
Figure 8–43 Max LD Capacity
Figure 8–44 Confirm LV Creation