Acer Altos RAIDWatch, Руководство пользователя

Страница: 132 / 212

Altos RAIDWatch User Guide
118
5 If you want to make multiple partitions, repeat the process. If you exit the View and Edit LD
Partition Table, you will need to click Edit and enter a password again before you can make
changes. A list of partitions is shown in Figure 8–57.
6 To remove partitions, make the size of the partition you wish to delete 0. The excess size will then
be given to the partition higher in the list and the partition will be deleted. All the partitions that
were below it will also be move one place higher in the table.
For example, if Partition 5 in Figure 8–57 needs to be deleted, reduce the size of Partition 5 to 0MB.
As can be seen in Figure 858, the overall size of Partition 4 would increase by 50MB, from 20MB to
70MB. The size of Partition 5 would then change from 50MB to 10MB (previous size of Partition 6)
and the size of Partition 6 would increase from 10MB to 70MB (the previous size of Partition 7).
Partition 7 would no longer exist.
7 The logical drive is now ready for mapping to host LUNs. See: Mapping Logical Drives/Volumes/
Partitions to Host LUNs.
8.4.3 Partitioning a Logical Volume (LV)
1 Select the “Logical Volume” icon from the Logical View Navigation Panel shown in Figure 8–59. As
shown in Figure 8–59 all the LVs that have been created will appear below the “Logical Volume”
icon.
Figure 8–57 List of Partitions
Figure 8–58 List of Modified Partitions