Abbott Precision Xceed Pro Скачать руководство пользователя

Страница: 61 / 85

9-1

Questions? Refer to Page 10-10 for Technical Support Instructions.

Once the test results have been collected during a prescribed period of time, they can be uploaded into the

data management system. The data management system provides a simple and automated way to collect, report and

transfer data.
To start the upload of data, simply place the Precision Xceed Pro

Monitor into the docking station. The monitor will

first turn on if it isn't already and then automatically upload data to the data management system.

During communications, the

Data Uploading

screen appears and the arrows

rotate to indicate that the system is working. The arrows may occasionally pause.

During data upload, the monitor cannot be used for testing.

After upload is complete, the monitor will display

Upload Successful

Turning

Off

and then shut down.

Note:

If the monitor is removed before data transmission is complete, some data may not be uploaded.

The data will be uploaded as part of the next data transmission.

If a problem occurs with the data upload, an error message may appear on the monitor. If the monitor is removed from

the docking station while an upload is in process, the monitor will display

Last upload incomplete, Redock meter

Turning Off

. The monitor will then shut down. Error messages are shown in Chapter 10, Troubleshooting. Further

troubleshooting information for any data upload question is provided in the data management user manual.

After a data upload error has occurred, the monitor will display a warning each time it is turned on. The monitor may

still be used for testing by pressing

Continue

. Once the monitor has successfully been docked, the warning will

disappear.

Data Upload

Chapter 9: Data Upload

Содержание Precision Xceed Pro






















































































Результаты поиска

Содержание Precision Xceed Pro

Отзывы:

Похожие инструкции для Precision Xceed Pro

Бренды по названию

Популярные бренды

Abbott Precision Xceed Pro, Руководство оператора

Результаты поиска

Содержание Precision Xceed Pro

Отзывы:

Похожие инструкции для Precision Xceed Pro

Бренды по названию

Популярные бренды