Abbott Precision Xceed Pro, Руководство оператора

Страница: 41 / 85

6-4
Questions? Refer to Page 10-10 for Technical Support Instructions.
1.
Follow steps 1 through 8 in the last
section on the Glucose Proficiency
Test. Make sure you use the purple
Blood
β-
Ketone test strip for the blood
β-
Ketone Proficiency Test. The monitor
will recognize the strip based on the bar
code.
Prior to inserting the test strip, ensure that the
port protector is installed and that it is clean
and dry. Replace if necessary. The display will
alternate between
Insert Strip
and
Ketone
.
2.
Bring proficiency survey specimens to
room temperature. Mix each specimen
well according to instructions from the
survey provider. Wipe away any specimen
on the tip of the vial before squeezing the
vial and applying a drop to the test strip
target area, covering the entire area. After
applying the sample, recap the vial tightly.
When sufficient sample has been applied,
the monitor beeps, displays
Sample
Accepted
and automatically starts the test.
For a detailed description of the test strip
target area, refer to the Test Strips section of
Chapter 1.
3.
Wait for the monitor to analyze the
sample and display the test result.
The monitor counts down then displays
the test result. If an error is detected during
the assay, the assay is terminated and no
result is displayed. Once the assay begins,
all key presses are ignored until the assay is
completed.
4.
If required, scan or manually enter the
comment code, and press
Enter.
If there
is no prompt to enter a comment code,
skip down to step 5.
The monitor may be enabled to scan or
enter a 1- to 2-digit comment code.
5.
You can select one of the following
options:
Press
1
–
Next Test
.
Press
Menu
to return to
Menu Mode
menu.
Press
On/Off
to turn off the monitor.
Remove the test strip from the monitor
and discard it when finished testing.
Follow your facility’s biohazard disposal
policy.
The display shows:
Sample ID
(
s:
prompt)
Comment Code
(Number in box)
Test Type
(Ketone)
Date and Time of test
Operator ID
(
o:
prompt)
Note that test date and time alternates with
Operator ID.
If
1
is selected, the
Scan or Enter Sample
ID
screen will appear. Return to step 1
to perform the
Next Test
with another
proficiency sample.
What You See on the Display What You Do Comments
Proficiency Test - β-Ketone
Please use the following procedures to perform a β-ketone proficiency test.
Chapter 6: Proficiency Test