KNX control elements and application parameters
"Blind" control element
Product manual 2CKA00xx73xxxxx
│
131
10.6
"Blind" control element
10.6.1 Name of the control element
Options: <Name>
Naming the blind switch control element, e.g. name of the window whose blind is to be
switched.
The length of the name is limited to 36 characters.
10.6.2 Function of the control element
Options:
Not defined (grey)
Light (yellow)
Blind (blue)
Temperature (orange)
Scene (magenta)
Alarm (red)
Feedback (green)
The parameter is used to specify the colour of the function line.
"Blind (blue)" has been made available for functions of this type.
10.6.3 Size of the button
Options:
1 column
2 columns
The parameter is used to specify whether the control element occupies one column (one button
or control frame) or two columns (two buttons or control frames).
10.6.4 Type of control
Options:
Short = stepwise/stop, long = moving
Short = moving/stop, long = stepwise
Short = moving/stop
The parameter is used to specify whether commands to move the blinds and adjust the slats
are sent to linked blind actuators via short or long actuations of the the buttons.
–
Short = stepwise/stop, long = move
: A short press of the button triggers a command to
adjust the slats or a stop command. A long press of the button triggers a move command.
The following supplementary parameter is available:
Long operation after ...:
Options:
Setting option from 0.3 - 10 seconds
