Operation
Product manual 2CKA00xx73xxxxx
│
320
12.7.9 System settings - Programming button
The buttons can be specified via programming buttons
Adding new programming button
Programmable button functions can be added and managed via the programming button tab.
1. Add a new programming button via the plus icon
2. Assign a function to the programming button.
– Light
– Relays
– Door
– …
3. Assign a name.
4. Enter the address of the programming button.
5. Tap on the house icon to display the programming button on the dashboard.
6. Then tap on "Save".
Managing door communication
Functions of the door communication can be arranged or managed via the door communication
tab. This serves to display the functions on the dashboard in the desired order.
1. Select the corresponding programming buttons and functions in the left area.
2. Then add via the arrows.
3. Adjust the order via the arrows in the right area.
12.7.10 System settings - Extended settings
Settings on the door communication can be made via the extended settings. In addition, a PID
file with the configurations made in the DCA can be uploaded (see chapter 13.1 “Transfer of
PID file (Configuration file) “ on page 324). If required, the system can be reset to the factory
settings.
The settings can only be made when the PIN code was entered successfully beforehand.
Managing door communication
Standard functions of the door communication can be activated and deactivated by activating
the checkboxes. Also a door communication configuration can be imported or exported via an
SD card.
Reading in a PID file
A PID file with the configuration from the DCA can be read in in the "Building automation" tab.
1. Tap on the "Read in PID file from SD card" button.
– An overview of all PID files available on the SD card are displayed.
2. Select the appropriate PID file.
3. Confirm the installation of the PID file by tapping on the "Install PID file" button.