ABB Relion 670 Series RES670, Техническое руководство

Страница: 511 / 888

Name Type Values (Range) Unit Description
U1IMAG REAL - - U1 Amplitude, magnitude of
instantaneous value
V1 REAL - kV V1 Reported magnitude value
U1ANGIM REAL - - U1 Angle, magnitude of
instantaneous value
V1ANGL REAL - deg V1 Magnitude angle
U2IMAG REAL - - U2 Amplitude, magnitude of
instantaneous value
V2 REAL - kV V2 Reported magnitude value
U2ANGIM REAL - - U2 Angle, magnitude of
instantaneous value
V2ANGL REAL - deg V2 Magnitude angle
Table 406: VNMMXU Monitored data
Name Type Values (Range) Unit Description
VA REAL - kV VA Amplitude, magnitude of
reported value
VA_ANGL REAL - deg VA Angle, magnitude of
reported value
VB REAL - kV VB Amplitude, magnitude of
reported value
VB_ANGL REAL - deg VB Angle, magnitude of
reported value
VC REAL - kV VC Amplitude, magnitude of
reported value
VC_ANGL REAL - deg V_C Angle, magnitude of
reported value
16.1.7 Operation principle
16.1.7.1 Measurement supervision
The protection, control, and monitoring IEDs have functionality to measure and further
process information for currents and voltages obtained from the pre-processing blocks.
The number of processed alternate measuring quantities depends on the type of IED and
built-in options.
The information on measured quantities is available for the user at different locations:
1MRK 511 365-UUS A
Section 16
Monitoring
Phasor measurement unit RES670 2.1 ANSI 505
Technical manual