Configuration and Programming by the Engineer
61
8.1.8 Menu 08 “User Auth”
Menu item “08=User Auth”:
Eight different user codes (PIN) can be
assigned for access level 1. In the default delivery state only user code (PIN)
1 is enabled, user codes (PINs) 2 – 8 are switched off. These user codes
(PINs) can be individually enabled. The set user codes (PINs) can then be
modified by the respective users in the user level.
The following user PINs are assigned in the default delivery state:
User no.
PIN
1 (On)
1111
2 (OFF)
2222
3 (OFF)
3333
4 (OFF)
4444
5 (OFF)
5555
6 (OFF)
6666
7 (OFF)
7777
8 (OFF)
8888
After selection of the menu the following request appears:
User
Number _
Enter the number of the user
User-3
User Auth-Off
Enter:
0=OFF;
1=ON
The user is enabled with “On”.
8.1.9 Menu 09 “Text”
Menu item
“
09=Text”:
Text can be stored for every circuit, every area, user
and evaluation module or setting module. Entry of the individual letters,
numbers and characters is undertaken using a 5 key keypad on the LCD
Keypad L240/PT. Some keys are already pre-assigned to simplify data
entry. The arrow key can be used to jump along the row of text. After correct
entry of the letter, figure or character you can move to the next text position
using the Enter button. The max. length of the text is 14 characters.
The following letters, figures and characters are available:
Capital letters (A ... Z).
Small letters (a ... z).
Various characters - /+#%^&*<>: ).
Figures (0 ... 9).
“1”
“2”
“3”
“4”
“5”
“6”
“7”
“8”
“9”
AB…
MN… Z…
ab…
mn…
z…
01…
9…
Space
With button “0” an existing text is deleted from the flashing text position
onwards.
In the submenus, the texts can be modified for:
1=Circuit
2=Area
3=User
4=L240/B/BS
Engineer-PIN
01 = System Size
02 = Area Opts
03 = Circuits
04 = Relay
05 = Alarm Times
06 = Keypads
07 = Concs *
08 = User Auth
09 = Text
10 = L240/B/BS*
11 = XS/1.1 KNX *
13 = 2-Conc Tamper *
15 = Defaults
16 = XIB-Detectors
8 = Edit
Engineer-PIN
01 = System Size
02 = Area Opts
03 = Circuits
04 = Relay
05 = Alarm Times
06 = Keypads
07 = Concs *
08 = User Auth
09 = Text
10 = L240/B/BS*
11 = XS/1.1 KNX *
13 = 2-Conc Tamper *
15 = Defaults
16 = XIB-Detectors
8 = Edit
