ABB EDS500 Series, Руководство по эксплуатации функций

Страница: 25 / 156

Functions Cold Start and Warm Start
2.6.3 Plan Device warm Start with Command
When modifying the configuration of a remote device it can get into a state in which it cannot
be reached any more.
To get an automatic reset of the device settings you can use a planned restart.
A planned restart resets the device to the startup configuration if the planned restart is not
cancelled or a modified configuration has been saved with the command <write>.
While the timer for the planned restart is running the remaining time is reported in intervals
of days, hours, 10 minutes and finally minutes.
Commands to plan a delayed start
< r e l o a d l a t e r { 1 - 5 2 5 6 0 0 } >
< r e l o a d c a n c e l >
2.7 Host Name and Description
Besides a host name further metadata can be set to describe a EDS500 device to grant
unique identification and easy location in the network. Especially in larger networks this
feature becomes important.
2.7.1 Host Name
The host name is the unique identification for a device in the network. The host name of
an EDS500 device may be up to 20 characters long and consist of any combinations of
characters, numbers and special characters.
The default value for Hostname is: switch.
A Hostname should consist only of 'A'-'Z', '0'-'9', '-' and '.' and the case is not significant.
Do not use any special characters or the underscore to comply with RFC 1123 (Requirements
for Internet Hosts).
Command to set the host name
< s e t s y s t e m h o s t n a m e { . . . } >
ADVICE
The host name is used as prompt at the command line interface (CLI).
Display of the host name as prompt at the command line interface (CLI)
s w i t c h # s e t s y s t e m h o s t n a m e t e s t
< s e t s y s t e m h o s t n a m e * >
H o s t n a m e s e t .
t e s t #
2.7.2 Description, Name of Contact and Location
Setting this meta data is optional. Use the descriptions to e.g. save identification data for
your organisation.
1KGT151021 V000 1 25