ABB EDS500 Series, Руководство по эксплуатации функций

Страница: 20 / 156

Loading and Saving a Configuration Functions
2.4.4 Transfer, Modification and Archiving Configurations
Configurations cannot only be displayed on the devices but can also be copied over the
network as files.
Like that, configuration data can be archived (centrally).
It is possible to edit configurations at a workstation and then transfer them to the devices.
The web interface (refer to "Handling in the Web Interface") gives a comfortable overview.
Files can be uploaded or downloaded via the web browser or via TFTP. TFTP transmissions
can also be started via SNMP (refer to Chapter 2.27, "SNMP Network Management" ).
The command line interface (CLI) has copy commands, to load files from a TFTP or save them
on a TFTP server.
During the execution of the copy command, the IP address of the TFTP server and the
required file names are requested interactively.
If a configuration is copied from a TFTP server to the device the format is checked for
plausibility.
Commands to transfer the configurations
< c o p y t f t p { . . . } >
< c o p y r u n n i n g - c o n f i g { . . . } >
< c o p y { . . . c o n f i g } t f t p >
2.4.5 Default Configuration and Reset of a Device
The default configuration of a device contains configuration commands that allow access
to the broadest set of functions of a system. On shipping all devices have the default
configuration. The default configuration is not identical with an empty configuration.
Device Settings Value Implicit default value Explicit command
System IP 10.0.0.2 Yes No
Subnet mask 255.255.255.0 Yes No
Gateway address 10.0.0.1 10.0.0.1 No
Host name switch Yes No
System VLAN none Yes No
Ethernet ports Admin state up No Yes
Ethernet speed Auto Negotiation Yes No
Optical ports Admin state up No Yes
Opt. port speed 100 Mbps, Full Duplex Yes No
DSL ports Admin state up No Yes
Properties dsl1 Master, 192 kbps Yes No
Properties dsl2 Slave, auto speed Yes No
Serial interfaces Operation mode con-
figuration
Yes No
Baud rate 57600 bps, 8N1 Yes No
Telnet Disabled Yes No
SSH Enabled Yes No
Table 6: Parameters of the default configuration
20 1KGT151021 V000 1