Handling in the Web Interface
Functions
Default configuration:
The Web-Server is activated with the configuration HTTP with redirection to HTTPS.
An IP connection between a PC and the device is required for configuration.
Enter the IP address of the device into the URL field of the browser to access the web
interface.
If a non-standard TCP port is configured for the web server then the port must be appended
to the IP address by a colon and the port number.
The default value for TCP port is: 80.
The default value for TCP secure port is: 443.
Only if a different TCP-port is to be used then it has to entered in the address explicitly.
Figure 2: Input of the IP address to access the web interface
After calling the URL in the browser, a dialogue pops up for authentication. Depending on
the set mode for user authentication (refer to Chapter 2.3, "User Authentication") enter the
access data.
Figure 3: Dialogue for authentication when accessing the web interface
Login mode
User name
Password
password
weblogin
Login password or Enable
password
RADIUS user name
Table 7:
Access data for Web interface
The default value for loginmode is: password. The default login password is empty.
Login with user name edslogin but without password.
The web interface allows to differentiate between view mode and configuration mode (refer
to Chapter 2.2.6, "Operation Modes - View (Login) and Configuration (Enable)"). Depending
on the configuration of the login password and enable password you have read-only or read-
write permissions in the web interface.
22
1KGT151021
V000 1
Содержание EDS500 Series
Страница 8: ...References Introduction 8 1KGT151021 V000 1 ...
Страница 152: ...Certificate Management Functions 152 1KGT151021 V000 1 ...
Страница 155: ...1KGT151021 V000 1 155 ...
