Configuring Softkeys
80
41-001524-00 REV01 – 07.2014
Sprecode Key
You can set a key to automatically activate specific services offered by the server by setting a key to
Sprecode
. For exam-
ple, if the sprecode value of *82 is configured, then by pressing the key, *82 automatically activates a service provided by
the server. The value you enter for this field is dependent on the services provided by the server. Contact your System
Administrator for information about available services.
Configuring a Sprecode Key Using the Aastra Web UI
Aastra Web UI
1.
Click on
Operation > Softkeys and XML
.
or
Click on
Operation > Expansion Module <N>.
Softkeys
2.
Select from
Key 1
through
Key 20
on the Top keys.
or
Select from
Key 1
through
Key 18
on the Bottom keys.
3.
In the
Type
field, select
Sprecode
.
4.
In the
Label
field, enter a label to display on the IP phone for this key.
5.
In the
Value
field, enter the appropriate value for accessing specific services from the server.
Note:
For values to enter in this field, contact your System Administrator.
6.
In the state fields, check (enable) or uncheck (disable) the
Connected
state for this softkey.
Expansion Module Keys
7.
Select from
Key 1
through
Key 16
.
8.
In the
Type
field, select
Sprecode
.
9.
In the
Value
field, enter the appropriate value for accessing specific services from the server.
Note:
For values to enter in this field, contact your System Administrator.
10.
Click
Save Settings
.