Configuring Softkeys
64
41-001524-00 REV01 – 07.2014
Line Key
You can set a softkey to act as a line/call appearance key on the 6867i. This key acts as a line that behaves the same as a
hard line key (L1 and L2). For more information about the behavior of
Line
keys, see
“Line and Call Appearances”
on
page 58
.
Depending on how the phone has been configured, the maximum number of total line/call appearances that can be
configured is 9 (2 line/call appearance hard keys plus 7 softkeys). If all line/call appearances have been set up between
two different numbers, a total of 8 lines can be configured. This means that when all line/call appearances are in use, 1
call is connected while the rest are on hold. No further outgoing or incoming calls can be made until one of the line/call
appearances becomes available.
Configuring a Line Key Using the Aastra Web UI
Note:
Line functionality can only be programmed on the left softkeys.
Aastra Web UI
1.
Click on
Operation > Softkeys and XML
.
or
Click on
Operation > Expansion Module <N>
.
Softkeys
2.
Select from
Key 1
through
Key 20
on the top keys.
3.
In the
Type
field, select
Line
to apply to the key.
4.
In the
Label
field, enter a label to apply to this key.
5.
In the
Line
field, select a line to apply to this key.
Valid values are
3
through
9
.
Expansion Module Keys
6.
Select from
Key 1
through
Key 16
.
7.
In the
Line
field, select a line to apply to this key.
Valid values are
3
through
9
.
8.
Click
Save Settings
.
