Aastra 6867i Скачать руководство пользователя страница 147

Страница: 147 / 189

Managing Calls

41-001524-00 REV01 – 07.2014

141

The following table describes the key and Message Waiting Indicator (MWI) LEDs when you enable DND on the IP phone.

Configuring a DND Key

The following describes the process of configuring DND on your phone. To configure a DND key, see

“Do Not Disturb

(DND) Key”

page 70

Configuring DND Using the Aastra Web UI

Key LED Behavior for All Modes (Left Softkeys Only)

MWI LED Behavior for All Modes

DND key LED

RED

if current account in focus has DND on.

DND key LED

off

when current account in focus has DND disabled.

MWI LED

if current account in focus has DND on.

MWI LED

off

if current account in focus has DND off.

Note:

If you make changes to the configuration for DND via the IP phone UI, you must refresh the Aastra Web UI screen to see
the changes.

Note:

If there is no DND key configured or if it has been removed, DND is disabled on the IP phone.

Aastra Web UI

Click on

Basic Settings > Preferences > General

In the

DND Key Mode

field, select a DND mode to use on the phone.

•

Account: Sets DND for a specific account. DND key toggles the account in focus on the phone to on or off.

•

Phone (default): Sets DND on for all accounts on the phone. DND key toggles all accounts on the phone to on or off.

•

Custom: Sets the phone to display custom screens after pressing the DND key that list the account(s) on the phone.
The user can select a specific account for DND, turn DND on for all accounts, or turn DND off for all accounts.

Notes:
•

If there is only one account configured on the phone, then the mode setting is ignored and the phone behaves as
if the mode was set to

Phone.

•

Using the Aastra Web UI, if you change the

DND Key Mode

to Phone, all accounts synchronize to the current setting

of Account 1.

Содержание 6867i






























































































































































































Результаты поиска

Содержание 6867i

Отзывы:

Похожие инструкции для 6867i

Бренды по названию

Популярные бренды

Aastra 6867i, Руководство пользователя

Результаты поиска

Содержание 6867i

Отзывы:

Похожие инструкции для 6867i

Бренды по названию

Популярные бренды