3M ESPE Elipar, Руководство по эксплуатации

Страница: 11 / 150

10
3. Removing the Battery for Disposal
To dispose of the battery, disconnect the Elipar LED
curing light from the charger, remove the two screws
on each side of the charging socket and push the
lower half of the housing towards the back, away from
the upper half of the housing. Use a suitable tool to
cut the connecting wires between the battery and the
circuit board and remove the battery for disposal in
accordance with 1. and 2.
4. Meaning of the Symbols
The EU Directive prohibits the disposal of any electric
or electronic devices marked
with these symbols in
combination with household
waste.
Customer Information
No person is authorized to provide any information
that deviates from the information provided in this
instruction sheet.
Warranty
3M Deutschland GmbH warrants this product will
be free from defects in material and manufacture.
3M Deutschland GmbH MAKES NO OTHER
WARRANTIES INCLUDING ANY IMPLIED
WARRANTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE. User is responsible
for determining the suitability of the product for
user’s application. If this product is defective within
the warranty period, your exclusive remedy and
3M Deutschland GmbH’s sole obligation shall be
repair or replacement of the 3M Deutschland GmbH
product.
Limitation of Liability
Except where prohibited by law, 3M Deutschland GmbH
will not be liable for any loss or damage arising from
this product, whether direct, indirect, special, incidental
or consequential, regardless of the theory asserted,
including warranty, contract, negligence or strict liability.
Information valid as of July 2012