3Com S7902E, Руководство по настройке

Страница: 672 / 2621

1-39
Specifying the LSA Generation Interval
With this feature configured, you can protect network resources and routers from being over consumed
due to frequent network changes.
Follow these steps to configure the LSA generation interval:
To do… Use the command… Remarks
Enter system view system-view
—
Enter OSPF view
ospf [ process-id | router-id
router-id | vpn-instance
instance-name ] *
Required
Configure the LSA
generation interval
lsa-generation-interval
maximum-interval [ initial-interval
[ incremental-interval ] ]
Optional
By default, the maximum interval
is 5 seconds, the minimum
interval is 0 milliseconds and the
incremental interval is 5000
milliseconds.
With this command configured, when network changes are not frequent, LSAs are generated at the
minimum-interval . If network changes become frequent, LSA generation interval is incremented by
incremental-interval •2n-2 (n is the number of generation times) each time a generation occurs, up to
the maximum-interval .
Disabling Interfaces from Sending OSPF Packets
Follow these steps to disable interfaces from sending routing information:
To do… Use the command… Remarks
Enter system view system-view
—
Enter OSPF view
ospf [ process-id | router-id
router-id | vpn-instance
instance-name ] *
—
Disable interfaces from
sending OSPF packets silent-interface { interface-type
interface-number | all }
Optional
Not disabled by default