3Com S7902E, Руководство по настройке

Страница: 2438 / 2621

1-8
To do… Use the command… Remarks
Display the system or interface
MAC address learning state
display mac-address
mac-learning
[ interface - type
interface - number ]
Display MAC address statistics
display mac-address
statistics
MAC Address Table Configuration Example
Network requirements
z
The MAC address of one host is 000f-e235-dc71 and belongs to VLAN 1. It is connected to
GigabitEthernet2/0/1 of the device. To prevent MAC address spoofing, add a static entry into the
MAC address table of the device for the host.
z
The MAC address of another host is 000f-e235-abcd and belongs to VLAN 1. Because this host
once behaved suspiciously on the network, you can add a destination blackhole MAC address
entry for the MAC address to drop all packets destined for the host for security sake.
z
Set the aging timer for dynamic MAC address entries to 500 seconds.
Configuration procedure
# Add a static MAC address entry.
<Sysname> system-view
[Sysname] mac-address static 000f-e235-dc71 interface gigabitethernet 2/0/1 vlan 1
# Add a destination blackhole MAC address entry.
[Sysname] mac-address blackhole 000f-e235-abcd vlan 1
# Set the aging timer for dynamic MAC address entries to 500 seconds.
[Sysname] mac-address timer aging 500
# Display the MAC address entry for port GigabitEthernet2/0/1.
[Sysname] display mac-address interface gigabitethernet 2/0/1
MAC ADDR VLAN ID STATE PORT INDEX AGING TIME
000f-e235-dc71 1 Config static GigabitEthernet2/0/1 NOAGED
--- 1 mac address(es) found ---
# Display information about the destination blackhole MAC address table.
[Sysname] display mac-address blackhole
MAC ADDR VLAN ID STATE PORT INDEX AGING TIME
000f-e235-abcd 1 Blackhole N/A NOAGED
--- 1 mac address(es) found ---
# View the aging time of dynamic MAC address entries.
[Sysname] display mac-address aging-time
Mac address aging time: 500s