1-9
To do…
Use the command…
Remarks
Enter
Ethernet
interface
view
interface interface-type interface-number
Enter
Ethernet
interface
view or port
group view
Enter port
group view
port-group manual port-group-name
Required
Use either command.
Configure the TLVs to be
advertised
lldp tlv-enable
{
basic-tlv
{
all
|
port-description
|
system-capability
|
system-description
|
system-name
} |
dot1-tlv
{
all
|
port-vlan-id
|
protocol-vlan-id
[
vlan-id
] |
vlan-name
[
vlan-id
] } |
dot3-tlv
{
all
|
link-aggregation
|
mac-physic
|
max-frame-size
|
power
} |
med-tlv
{
all
|
capability
|
inventory
|
location-id
{
civic-address
device-type country-code
{
ca-type ca-value
}
&<1–10>
|
elin-address
tel-number
} |
network-policy
|
power-over-ethernet
} }
Optional
By default, all types of
LLDP TLVs except
location identification
TLV are advertisable.
Configuring the Management Address and Its Encoding Format
LLDP encodes management addresses in numeric or character string format in management address
TLVs.
By default, management addresses are encoded in numeric format. If a neighbor encoded its
management address in character string format, you can configure the encoding format of the
management address as string on the connecting port to guarantee normal communication with the
neighbor.
Follow these steps to configure a management address to be advertised and its encoding format on one
or a group of ports:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enter
Ethernet
interface
view
interface interface-type
interface-number
Enter
Ethernet
interface
view or port
group view
Enter port
group view
port-group manual
port-group-name
Required
Use either command.
Enable LLDP to advertise
management address TLVs,
and optionally, configure a
management IP address if
needed
lldp
management-address-tlv
[
ip-address
]
Optional
By default, the management
address is sent through LLDPDUs,
and the management address is the
main IP address of the lowest-ID
VLAN carried on the interface. If
none of the carried VLANs is
assigned an IP address, no
management address will be
advertised.
Configure the encoding
format of the management
address to character string
lldp
management-address-for
mat string
Optional
By default, the management
address is encapsulated in the
numeric format.
Содержание S7902E
