3Com S7902E, Руководство по настройке

Страница: 1965 / 2621

1-16
Quiet-interval(min) : 5
Username format : without-domain
Data flow unit : Byte
Packet unit : one
Use the following command to view the configuration information of the ISP domain named sun :
<Switch> display domain sun
Domain : sun
State : Active
Access-limit : 30
Accounting method : Required
Default authentication scheme : radius:radsun
Default authorization scheme : radius:radsun
Default accounting scheme : radius:radsun
Domain User Template:
Idle-cut : Disabled
Self-service : Disabled
Authorization attributes:
Use the following command to view the port security configuration information:
<Switch> display port-security interface gigabitethernet 2/0/1
Equipment port-security is enabled
Trap is disabled
Disableport Timeout: 20s
OUI value:
Index is 1, OUI value is 123401
Index is 2, OUI value is 123402
Index is 3, OUI value is 123403
Index is 4, OUI value is 123404
Index is 5, OUI value is 123405
GigabitEthernet2/0/1 is link-up
Port mode is userLoginWithOUI
NeedToKnow mode is disabled
Intrusion Protection mode is NoAction
Max MAC address number is not configured
Stored MAC address number is 0
Authorization is permitted
After an 802.1X user gets online, you can see that the number of secure MAC addresses stored is 1.
You can also use the following command to view information about 802.1X users:
<Switch> display dot1x interface gigabitethernet 2/0/1
Equipment 802.1X protocol is enabled
CHAP authentication is enabled
Proxy trap checker is disabled
Proxy logoff checker is disabled
EAD quick deploy is disabled
Configuration: Transmit Period 30 s, Handshake Period 15 s