3Com S7902E, Руководство по настройке

Страница: 344 / 2621

5-13
Displaying and Maintaining Alarm Configurations
To do... Use the command... Remarks
Display the configuration
information in FTTH view, OLT
port view, or ONU port view
display current-configuration
[
configuration ftth
|
interface
interface-type
interface-number
]
Available in any view
Display the configuration
information in the current view
display this
Available in the current view
Display alarm event records
display trapbuffer
[
reverse
]
[
size buffersize
]
Available in any view
Use the
display this
command to display the configuration in the current view. To display the
alarm configurations in FTTH view, OLT port view, or ONU port view, you need to enter the
corresponding view.
Table 5-1 shows the relations between the views in which alarms are configured and the views in
which alarm configurations are displayed.
For details about the
display trapbuffer
command, see the part discussing information center in
the command manual.
Table 5-1
Relations between the alarm command configuration views and alarm configuration display
views
Alarm command
configuration view
Alarm configuration display
view
Remarks
FTTH view
OLT port view
ONU port view
ONU port view
For an alarm configuration
command available in any of
the three views, you can use
the
display this
command in
ONU port view to display the
alarm configuration.
FTTH view
OLT port view
OLT port view
OLT port view
For an alarm configuration
command available in FTTH
view and OLT port view, you
can use the
display this
command in OLT port view
to display the alarm
configuration.
For an alarm configuration
command available in OLT
port view only, you can use
the
display this
command
in OLT port view to display
the alarm configuration.