3Com S7902E, Руководство по настройке

Страница: 1498 / 2621

1-19
Remote ccc vc : 1, 1 up
***Name : ce1-ce2
Type : remote
State : up
Intf : Vlan-interface10 (up)
In-label : 100
Out-label : 200
Nexthop : 10.1.1.2
# Ping CE 2 from CE 1.
[CE1] ping 100.1.1.2
PING 100.1.1.2: 56 data bytes, press CTRL_C to break
Reply from 100.1.1.2: bytes=56 Sequence=1 ttl=255 time=180 ms
Reply from 100.1.1.2: bytes=56 Sequence=2 ttl=255 time=60 ms
Reply from 100.1.1.2: bytes=56 Sequence=3 ttl=255 time=10 ms
Reply from 100.1.1.2: bytes=56 Sequence=4 ttl=255 time=70 ms
Reply from 100.1.1.2: bytes=56 Sequence=5 ttl=255 time=60 ms
--- 100.1.1.2 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 10/76/180 ms
Example for Configuring SVC MPLS L2VPN
Network requirements
z
CEs are connected to PEs through VLAN interfaces.
z
An SVC MPLS L2VPN is established between CE 1 and CE 2.
Figure 1-4 Network diagram for configuring SVC MPLS L2VPN
Device Interface IP address Device Interface IP address
CE 1 Vlan-int10 100.1.1.1/24 P Loop0 192.4.4.4/32
PE 1 Loop0 192.2.2.2/32 Vlan-int30 10.2.2.2/24
Vlan-int20 10.1.1.1/24 Vlan-int20 10.1.1.2/24
CE 2 Vlan-int10 100.1.1.2/24 PE 2 Loop0 192.3.3.3/32
Vlan-int30 10.2.2.1/24
Configuration procedure
The main steps are the following two: