3Com S7902E, Руководство по настройке

Страница: 231 / 2621

1-8
To do... Use the command... Remarks
Exit to system view quit —
Enter the interface view of the uplink
port interface interface-type
interface-number
—
Set the link type of the uplink port to
trunk
port link-type trunk Required
Configure the uplink port to permit the
specified SVLANs to pass through port trunk permit vlan
{ vlan-id-list | all }
Required
By default, a trunk port
permits only VLAN 1 to
pass through.
Table 1-1 Configure an uplink policy
To do... Use the command... Remarks
Enter system view system-view —
Create a class and enter class
view traffic classifier tcl-name
[ operator { and | or } ]
Required
Specify the CVLAN for the
VLAN mapping if-match customer-vlan-id
vlan-id-value
Required
Exit to system view quit —
Create a traffic behavior and
enter traffic behavior view
traffic behavior
behavior-name
Required
Specify the SVLAN for the
VLAN mapping remark service-vlan-id
vlan-id-value
Required
Exit to system view quit —
Create a QoS policy and enter
QoS policy view
qos policy policy-name Required
Map the CVLAN to the SVLAN
by associating the traffic class
with the traffic behavior
classifier tcl-name behavior
behavior-name
Required
Exit to system view quit —
Table 1-2 Configure a downlink policy
To do... Use the command... Remarks
Enter system view system-view —
Create a class and enter class
view traffic classifier tcl-name
[ operator { and | or } ]
Required
Specify the SVLAN for the
VLAN mapping
if-match service-vlan-id
vlan-id-value
Required
Exit to system view quit —
Create a traffic behavior and
enter traffic behavior view traffic behavior
behavior-name
Required