1-15
To do…
Use the command…
Remarks
Configure the cluster ID of the
route reflector
reflector cluster-id
cluster-id
Optional
By default, a route reflector
uses its router ID as the cluster
ID.
z
The clients of a route reflector should not be fully meshed, and the route reflector reflects the routes
of a client to the other clients. If the clients are fully meshed, you need to disable route reflection
between clients to reduce routing costs.
z
If a cluster has multiple route reflectors, you need to specify the same cluster ID for these route
reflectors to avoid routing loops.
Displaying and Maintaining IPv6 MBGP
Displaying IPv6 MBGP
To do…
Use the command…
Remarks
Display the IPv6 MBGP peer
group information
display bgp ipv6 multicast group
[
ipv6-group-name
]
Available in
any view
Display IPv6 MBGP routing
information injected with the
network
command
display bgp ipv6 multicast network
Available in
any view
Display the IPv6 MBGP AS
path information of routes
display bgp ipv6 multicast
paths
[
as-regular-expression
]
Available in
any view
Display IPv6 MBGP peer/peer
group information
display bgp ipv6 multicast peer
[ [
ipv6-address
]
verbose
]
Available in
any view
Display the prefix entries in the
ORF information of the
specified BGP peer
display bgp ipv6 multicast peer ipv6-address
received ipv6-prefix
Available in
any view
Display IPv6 MBGP routing
table information
display bgp ipv6 multicast routing-table
[
ipv6-address prefix-length
]
Available in
any view
Display IPv6 MBGP routing
information matching a AS path
ACL
display bgp ipv6 multicast routing-table
as-path-acl as-path-acl-number
Available in
any view
Display IPv6 MBGP routing
information with the specified
community attribute
display bgp ipv6 multicast routing-table
community
[
aa:nn
<1-13> ] [
no-advertise
|
no-export
|
no-export-subconfed
]*
[
whole-match
]
Available in
any view
Display routing information
matching an IPv6 MBGP
community list
display
bgp ipv6
multicast routing-table
community-list
{
basic-community-list-number
[
whole-match
] |
adv-community-list-number
}&<1-16>
Available in
any view
Display IPv6 MBGP dampened
routing information
display bgp ipv6
multicast routing-table
dampened
Available in
any view
Содержание S7902E
