3Com S7902E, Руководство по настройке

Страница: 1935 / 2621

1-16
Figure 1-8 Device list
On the port group configuration page, click Add to enter the page for adding a port group, as shown in
Figure 1-9 . Perform the following configurations:
z
Type the port group name.
z
Select the configured IP address group. Note that the IP address used by the user to access the
network must be within this IP address group.
Figure 1-9 Port group configuration
# Select Service Parameters > Validate System Configuration from the navigation tree to make the
previous configurations take effect.
2) Configure the switch:
z
Configure a RADIUS scheme
# Create a RADIUS scheme named rs1 and enter its view.
<Switch> system-view
[Switch] radius scheme rs1
# Set the server type for the RADIUS scheme. When using the iMC server, you need set the server type
to extended .
[Switch-radius-rs1] server-type extended
# Specify the primary authentication server and primary accounting server, and configure the keys for
communication with the servers.
[Switch-radius-rs1] primary authentication 192.168.0.112
[Switch-radius-rs1] primary accounting 192.168.0.112
[Switch-radius-rs1] key authentication radius
[Switch-radius-rs1] key accounting radius