ZyXEL Communications NWA-3550 User Manual Download Page 35

Page: 35 / 408

Chapter 1 Introducing the NWA

NWA-3500/NWA-3550 User’s Guide

The following table describes the behavior of the device LEDs.

LABEL LED

COLOR

STATUS

DESCRIPTION

WL1

Green

The wireless adaptor WLAN1 is active.

Blinking

The wireless adaptor WLAN1 is active, and
transmitting or receiving data.

Off

The wireless adaptor WLAN1 is not active.

WDS/SYS

Green

The NWA is in AP + Bridge or Bridge/
Repeater mode, and has successfully
established a Wireless Distribution System
(WDS) connection.

Red

Flashing

The NWA is starting up.

Off

Either

The NWA is in Access Point or MBSSID mode
and is functioning normally.

The NWA is in AP + Bridge or Bridge/
Repeater mode and has not established a
Wireless Distribution System (WDS)
connection.

The NWA is not receiving power.

WL2

Green

The wireless adaptor WLAN2 is active.

Blinking

The wireless adaptor WLAN2 is active, and
transmitting or receiving data.

Off

The wireless adaptor WLAN2 is not active.

ZyAIR

Blue

The NWA is receiving power.

You can turn the ZyAIR LED off and on using
the Web configurator. See

Enable

Breathing LED

Section 8.3 on page 123

Blinking

The NWA is receiving power and
transmitting data to or receiving data from
its wireless stations.

Off

Either

The NWA is not receiving power.

The ZyAIR LED has been disabled. See

Section 8.3 on page 123

for how to enable

the ZyAIR LED.

Summary of Contents for NWA-3550

























































































































































































































































































































































































































Search results

Summary of Contents for NWA-3550

Reviews:

Related manuals for NWA-3550

Brands by name

Popular brands

ZyXEL Communications NWA-3550, User Manual

Search results

Summary of Contents for NWA-3550

Reviews:

Related manuals for NWA-3550

Brands by name

Popular brands