ZyXEL Communications NWA-3550 User Manual Download Page 83

Page: 83 / 408

NWA-3500/NWA-3550 User’s Guide

H A P T E R

Status Screens

4.1 Overview

The

Status

screen displays when you log into the NWA or click

Status

in the

navigation menu. Use this screen to look at the current status of the device,
system resources, and interfaces. The

Status

screen also provides detailed

information about system statistics, associated wireless clients, and logs.

4.2 The Status Screen

Use this screen to get a quick view of system, Ethernet, WLAN and other
information regarding your NWA.

Click

Status

. The following screen displays.

Figure 54

The Status Screen

Summary of Contents for NWA-3550

























































































































































































































































































































































































































Search results

Summary of Contents for NWA-3550

Reviews:

Related manuals for NWA-3550

Brands by name

Popular brands

ZyXEL Communications NWA-3550, User Manual

Search results

Summary of Contents for NWA-3550

Reviews:

Related manuals for NWA-3550

Brands by name

Popular brands