ZyXEL Communications NWA-3550, User Manual

Page: 50 / 408

Chapter 3 Tutorial
NWA-3500/NWA-3550 User’s Guide
50
3.3.2.2 Activate the VoIP Profile
You need to activate the VoIP_SSID profile before it can be used. Click the
Wireless tab. In the Select SSID Profile table, select the VoIP_SSID profile’s
Active checkbox and click Apply .
Figure 22 Tutorial: Activate VoIP Profile
Your VoIP wireless network is now ready to use. Any traffic using the VoIP_SSID
profile will be given the highest priority across the wireless network.
3.3.3 Configure the Guest Network
When you are setting up the wireless network for guests to your office, your
primary concern is to keep your network secure while allowing access to certain
resources (such as a network printer, or the Internet). For this reason, the pre-
configured
Guest_SSID profile has layer-2 isolation and intra-BSS traffic blocking
enabled by default. “Layer-2 isolation” means that a client accessing the network
via the
Guest_SSID profile can access only certain pre-defined devices on the
network (see Section on page 174 ), and “intra-BSS traffic blocking” means that
the client cannot access other clients on the same wireless network (see Section
8.3 on page 123 ).