ZyXEL Communications NWA-3550, User Manual

Page: 77 / 408

Chapter 3 Tutorial
NWA-3500/NWA-3550 User’s Guide
77
If the Registration Type is set to Manual , the controller AP add managed APs to
a queue in the Un-Managed Access Points List in the Controller > AP Lists
screen.
If the Registration Type is set to Always Accept , the controller AP immediately
adds the AP to the Managed Access Points List in the Controller > AP Lists
screen.
For this example, we set the Registration Type to Manual .
1
To add a managed AP to the controller AP’s coverage, go to Controller > AP
Lists .
Figure 50 Tutorial: AP List (Un-Managed)
2
Select the NWA managed APs from the Un-Managed Access Points List as
shown in the screen above. You can also identify these managed APs by filling in
the
Description field. Click Add .
3
The 2nd, 3rd and 4th floor NWA managed APs ( B , C and D ) should now be in the
Manged Access Points List . By default, newly added managed APs in the list
have their WLAN Radio Profile set to disabled. This means that their wireless
functions are turned off.
Note: The NWA controller AP uses WLAN Radio Profile to categorize different
wireless settings present in a managed AP. Each profile contains the SSID,
security mode, RADIUS, Layer-2 Isolation and MAC filter configurations.