Chapter 6 Rover App Tutorials
NBG7510 User’s Guide
63
4
Change the default SSID and WiFi key on the Rover Router for better WiFi security; see
Section 6.7.1 on
page 66
for more information. After applying changes, you will need to reconnect to Rover Router
again using the new SSID and WiFi key.
5
Use WPS to copy the SSID and WiFi key from the Rover Router to the Rover AP. Press the WPS button on
the Rover Router for 1.5 to 4 seconds and then press the WPS button on the Rover AP until the LED blinks
in purple within 120 seconds.
6
Use the Rover app and the table below to see if the access point is securely connected to the router;
see
Section 6.8 on page 71
for more information.
6.4.2 Connect the Rover Router to the WRE6605 AP Using a Wired
Connection
Follow the steps below to set up the Rover Router with an access point (the WRE6605AP as an example).
Connect the Rover Router to the Internet. The Rover Router must be connected to a modem/router
using an Ethernet cable. Then, connect the LAN port on the WRE6605AP to a LAN port on the Rover
Router using another Ethernet cable.
Table 12 Link Quality
ICON
CONNECTION TYPE
WIFI STATUS
Wired
Wired Connection
Wired
Blocked
Wireless
Good to Go
Wireless
Too Close to the Router
Wireless
Weak WiFi
Wireless
Blocked
Table 13 Device Role
DEVICE
TERM
ROLE
Zyxel Device in Router mode
Rover Router
Router
WRE6605 in AP mode
WRE6605 AP
Access Point
