ZyXEL Communications NBG7510 User Manual Download Page 54

Page: 54 / 149

Chapter 5 Tutorials

NBG7510 User’s Guide

Click

Add New Rule

and use the following fields to configure and apply a new ACL (Access Control List)

rule.

Filter Name

: Enter a name to identify the firewall rule.

Source IP Address

: Enter the IP address of the computer that initializes traffic for the application or

service.

Destination IP Address

: Enter the IP address of the computer to which traffic for the application or

service is entering.

Protocol

: Select the protocol (

ALL

TCP/UDP

TCP

UDP

ICMP

ICMPv6

) used to transport the

packets.

Policy

: Select whether to (

ACCEPT

DROP

, or

REJECT

) the packets.

Direction

: Select the direction (

WAN to LAN

LAN to WAN

WAN to ROUTER

, or

LAN to ROUTER

) of the

traffic to which this rule applies.

Select

Enable Rate Limit

to activate the rules you created. Click

Summary of Contents for NBG7510






















































































































































Search results

Summary of Contents for NBG7510

Reviews:

ZyXEL Communications NBG7510, User Manual, Page: 54 / 149

Search results

Summary of Contents for NBG7510

Reviews: