Chapter 10 Home Networking
NBG7510 User’s Guide
135
The following table describes the labels in this screen.
10.4 UPnP
Universal Plug and Play (UPnP) is an open networking standard that uses TCP/IP for simple peer-to-peer
network connectivity between networking devices or software applications which have UPnP enabled.
A UPnP device can dynamically join a network, obtain an IP address, advertise its services, and learn
about other devices on the network. A device can also leave a network automatically when it is no
longer in use.
See
Section on page 142
for more information on UPnP.
Note: To use
UPnP NAT-T
, enable
NAT
in the
Network Setting
>
Broadband
>
Edit
or
Add New
WAN Interface
screen.
Use the following screen to configure the UPnP settings on your Zyxel Device. Click
Network Setting
>
Home Networking
>
UPnP
to display the screen shown next.
Table 44 Static DHCP: Static DHCP Configuration
LABEL
DESCRIPTION
Active
Select
Enable
to activate static DHCP in your Zyxel Device
.
Group Name
The
Group Name
is normally
Default
.
IP Type
The
IP Type
is normally
IPv4
(non-configurable).
Select Device Info
Select between
Manual Input
which allows you to enter the next two fields (
MAC Address
and
IP Address
); or selecting an existing device would show its MAC address and IP address.
MAC Address
Enter the MAC address of a computer on your LAN if you select
Manual Input
in the previous
field.
IP Address
Enter the IP address that you want to assign to the computer on your LAN with the MAC
address that you will also specify if you select
Manual Input
in the previous field.
OK
Click
OK
to save your changes.
Cancel
Click
Cancel
to exit this screen without saving.