Chapter 36 Link Layer Discovery Protocol (LLDP)
MGS3520 Series User’s Guide
308
36.7 LLDP-MED Configuration
Click
Advanced Application
>
LLDP > LLDP-MED Configuration
to display the screen as shown
next.
Figure 191
Advanced Application > LLDP > LLDP-MED Configuration
Power Via MDI
Note
: For PoE models only. The Power Via MDI TLV allows network management to
advertise and discover the MDI power support capabilities of the sending port on the
remote device.
•
Port Class
•
MDI Supported
•
MDI Enabled
•
Pair Controlable
•
PSE Power Pairs
•
Power Class
Apply
Click
Apply
to save your changes to the Switch’s run-time memory. The Switch loses
these changes if it is turned off or loses power, so use the
Save
link on the top
navigation panel to save your changes to the non-volatile memory when you are done
configuring.
Cancel
Click
Cancel
to begin configuring this screen afresh.
Table 147
Advanced Application > LLDP > LLDP Configuration > Org-specific TLV Setting
LABEL
DESCRIPTION