Chapter 44 Syslog
MGS3520 Series User’s Guide
375
Figure 244
Management > Syslog
The following table describes the labels in this screen.
44.3 Syslog Server Setup
Click
Management
>
Syslog
>
Syslog Server Setup
to view the screen as shown next. Use this
screen to configure a list of external syslog servers.
Table 187
Management > Syslog
LABEL
DESCRIPTION
Syslog
Select
Active
to turn on syslog (system logging) and then configure the syslog setting
Logging Type
This column displays the names of the categories of logs that the device can generate.
Active
Select this option to set the device to generate logs for the corresponding category.
Facility
The log facility allows you to send logs to different files in the syslog server. Refer to the
documentation of your syslog program for more details.
Privilege
Select a command privilege level. The Switch will only generate logs for commands that have
a privilege level greater than or equal to the specified privilege level.
Apply Click
Apply
to save your changes to the Switch’s run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the
Save
link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Cancel
Click
Cancel
to begin configuring this screen afresh.
