Chapter 4 The Web Configurator
MGS3520 Series User’s Guide
39
4.3.1 Change Your Password
After you log in for the first time, it is recommended you change the default administrator
password. Click
Management
>
Access Control >
Logins
to display the next screen.
Figure 20
Change Administrator Login Password
4.4 Saving Your Configuration
When you are done modifying the settings in a screen, click
Apply
to save your changes back to
the run-time memory. Settings in the run-time memory are lost when the Switch’s power is turned
off.
Click the
Save
link in the upper right hand corner of the web configurator to save your
configuration to nonvolatile memory. Nonvolatile memory refers to the Switch’s storage that
remains even if the Switch’s power is turned off.
Note: Use the
Save
link when you are done with a configuration session.
Configure Clone
This link takes you to a screen where you can copy attributes of one port to (an)other
port(s).
Neighbor Table
This link takes you to a screen where you can view the IPv6 neighbor table which includes
index, interface, neighbor address, MAC address, status and type.
Table 5
Navigation Panel Links (continued)
LINK
DESCRIPTION