Chapter 5 Initial Setup Example
MGS3520 Series User’s Guide
44
Figure 24
Initial Setup Network Example: Port VID
1
Click
Advanced Applications
>
VLAN
in the navigation panel. Then
click the
VLAN Port Setting
link.
2
Enter 2 in the
PVID
field for port 1
and click
Apply
to save your
changes back to the run-time
memory. Settings in the run-time
memory are lost when the Switch’s
power is turned off.
5.2 Configuring Switch Management IP Address
The default management IP address of the Switch is 192.168.1.1. You can configure another IP
address in a different subnet for management purposes. The following figure shows an example.
Figure 25
Initial Setup Example: Management IP Address