Chapter 25 Multicast
MGS3520 Series User’s Guide
220
Figure 127
Advanced Application > Multicast > MVR: Group Configuration
The following table describes the labels in this screen.
Table 94
Advanced Application > Multicast > MVR: Group Configuration
LABEL
DESCRIPTION
Multicast
VLAN ID
Select a multicast VLAN ID (that you configured in the
MVR
screen) from the drop-down list
box.
Group Name
Enter a descriptive name for identification purposes.
Start Address
Enter the starting IP multicast address of the multicast group in dotted decimal notation.
Refer to
for more information on IP multicast addresses.
End Address
Enter the ending IP multicast address of the multicast group in dotted decimal notation.
Enter the same IP address as the
Start Address
field if you want to configure only one IP
address for a multicast group.
Refer to
for more information on IP multicast addresses.
Add
Click
Add
to save your changes to the Switch’s run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the
Save
link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Cancel
Click
Cancel
to begin configuring this screen afresh.
MVLAN
This field displays the multicast VLAN ID.
Group Name
This field displays the descriptive name for this setting.
Start Address
This field displays the starting IP address of the multicast group.
End Address
This field displays the ending IP address of the multicast group.
Delete
Select the entry(ies) that you want to remove in the
Delete
column, then click the
Delete
button to remove the selected entry(ies) from the table.
If you delete a multicast VLAN, all multicast groups in this VLAN will also be removed.
Cancel Select
Cancel
to clear the checkbox(es) in the table.
