ZyXEL Communications MAX318M2W User Manual Download Page 61

Page: 61 / 294

Chapter 5 System Status

MAX318M2W User’s Guide

BSID

This field displays the MAC address of the base station to which the
device is connected.

Frequency

This field indicates the frequency the WiMAX Device is using.

Signal

Strength

This field indicates the strength of the connection that the WiMAX
Device has with the base station.

Link Quality

This field indicates the relative quality of the link the WiMAX Device has
with the base station.

VoIP Phone

Account1

Subscriber

This field displays the SIP number for SIP account 1.

Registered

Status

This field displays whether SIP account 1 is already registered with a
SIP server (Registered or Unregistered).

Account2

Subscriber

This field displays the SIP number for SIP account 2.

Registered

Status

This field displays whether SIP account 2 is already registered with a
SIP server (Registered or Unregistered).

Line1 Status This field displays whether phone line 1 (mapping to the VoIP1 port) is

in use or not (idle).

Line2 Status This field displays whether phone line 2 (mapping to the VoIP2 port) is

in use or not (idle).

WAN

Status

This field indicates the status of the WAN connection to the WiMAX
Device.

MAC

Address

This field indicates the MAC address of the port making the WAN
connection on the WiMAX Device.

IP Address

This field indicates the current IP address of the WiMAX Device in the
WAN.

Subnet Mask This field indicates the current subnet mask on the WAN.
Gateway

This field indicates the IP address of the gateway to which the WiMAX
Device is connected.

MTU

This field indicates the Maximum Transmission Unit (MTU) between the
WiMAX Device and the ISP servers to which it is connected.

DNS

This field indicates the Domain Name Server (DNS) to which your
WiMAX Device is connected.

LAN

MAC

Address

This field indicates the MAC address of the port making the LAN
connection on the WiMAX Device.

IP Address

This field displays the current IP address of the WiMAX Device in the
LAN.

Subnet Mask This field displays the current subnet mask in the LAN.
MTU

This field indicates the Maximum Transmission Unit (MTU) between the
WiMAX Device and the client devices to which it is connected.

Table 14

Status (continued)

LABEL

DESCRIPTION

Summary of Contents for MAX318M2W







































































































































































































































































































Search results

Summary of Contents for MAX318M2W

Reviews:

Related manuals for MAX318M2W

Brands by name

Popular brands

ZyXEL Communications MAX318M2W, User Manual

Search results

Summary of Contents for MAX318M2W

Reviews:

Related manuals for MAX318M2W

Brands by name

Popular brands