ZyXEL Communications MAX318M2W, User Manual

Page: 35 / 294

Chapter 3 Setup Wizard
MAX318M2W User’s Guide
35
3.1.4 WiMAX Authentication Settings
The WiMAX Authentication Settings screen allows you to configure how your
WiMAX Device logs into the service provider’s network.
Note: These settings should be provided by your ISP.
Note: The EAP supplicant settings on this screen vary depending on the
authentication mode your select.
End
Frequency
Enter the frequency value at the end of the frequency range to use.
Note: This field only appears when you select By Range under
Setting Type .
Bandwidth Set the frequency bandwidth in MHz that this WiMAX Device uses.
# This is an index number for enumeration purposes only.
Frequency (MHz) Displays the frequency MHz for the item in the list.
Total Num
Displays the total number of items in the list.
Delete Click this to remove an item from the list.
Add Click this to add an item to the list.
OK Click this to save an newly added item to the list.
# This is an index number for enumeration purposes only.
Band Start (KHz) Indicates the beginning of the frequency band in KHz.
Band End (KHz)
Indicates the end of the frequency band in KHz.
Total Num Displays the total number of items in the list.
Back Click to display the previous screen.
Next Click to proceed to the next screen.
Table 9 Setup Wizard > WiMAX Frequency Settings (continued)
LABEL DESCRIPTION