ZyXEL Communications MAX318M2W, User Manual

Page: 172 / 294

Chapter 12 Maintenance
MAX318M2W User’s Guide
172
12.8 OMA-DM
Use this screen to allow remote access to the WiMAX Device from a network
connection over OMA-DM. See
Section 12.8 on page 172 for more information
about OMA-DM.
Click Maintenance > Remote MGMT > OMA-DM to open this screen as shown
next.
Figure 89 OMA-DM Screen
This screen contains the following fields:
Table 69 OMA-DM
LABEL DESCRIPTION
Enable Select this to enable remote management using this service.
Server URL Enter the IP address or URL of the OMA-DM server that you intend to
use to manage this device.
Server Port Enter the port number for the IP address of the OMA-DM server set up
in the preceding field.
Server Auth
Type Select the encryption algorithm scheme used by the OMA-DM server to
communicate with client devices. If the scheme selected here does not
match the actual scheme used by the server, then server will challenge
the WiMAX Device to automatically update its settings.
• NONE - No authentication.
• BASIC - Server ID and Password are encoded using a Basic Access
Authentication Code.
• MD5 - Server ID and Password are encoded using a Digest Access
Authentication Code.
• HMAC - Server ID and Password are encoded using a keyed Hash
Message Authentication Code.
Server ID Enter the identification code for the server. This is used by the WiMAX
Device during the communication handshake process to identify the
server.