ZyXEL Communications MAX318M2W, User Manual

Page: 145 / 294

Chapter 10 The VoIP Account Screens
MAX318M2W User’s Guide
145
10.3 Server
Click VoIP > Account 1 (or Account 2) > Server to configure the register
server, proxy server, outbound proxy server and NAT settings for this SIP account.
Figure 70 VoIP > Account 1 (or Account 2) > Server
The following table describes the labels in this screen.
Table 52 VoIP > Account 1 (or Account 2) > Server
LABEL DESCRIPTION
Registrar Server
Registrar
Server
Enter the IP address or domain name of a SIP server. You can use up to
127 printable ASCII characters.
Port Number Enter the SIP server’s listening port number. Keep the default value, if
you are not sure of this value.
SIP Service
Domain
Enter the SIP service domain which is the part of the SIP URI that
comes after the "@" symbol. For example, if the SIP URI is
1122334455@VoIP-provider.com, then "VoIP-provider.com" is the SIP
service domain.
Register
Period Time
Enter the session expiry time in seconds for the phone connections
using this account.
This allows the WiMAX Device to automatically disconnect any phone
calls using this account after a certain period of inactivity.
Proxy Server
Proxy Server Enter the IP address or domain name of the SIP proxy server provided
by your VoIP service provider. You can use up to 64 printable ASCII
characters.
Port Number Enter the SIP proxy server’s listening port number, if your VoIP service
provider gave you one. Otherwise, keep the default value.
Outbound Server