ZyXEL Communications MAX318M2W, User Manual

Page: 34 / 294

Chapter 3 Setup Wizard
MAX318M2W User’s Guide
34
3.1.3 WiMAX Frequency Settings
The WiMAX Frequency Settings screen allows you to configure the broadcast radio
frequency used by the WiMAX Device.
Note: These settings should be provided by your ISP.
Figure 11 Setup Wizard > WiMAX Frequency Settings
The following table describes the labels in this screen.
Table 9 Setup Wizard > WiMAX Frequency Settings
LABEL DESCRIPTION
Setting Type Select the WiMAX frequency setting type from the list.
• By Range - Select this to set up the frequency based on a range of
MHz.
• By List - Select this to set up the frequency on an individual MHz
basis. You can add multiple MHz values to the list.
Step Enter the increments in MHz by which to increase the frequency range.
Note: This field only appears when you select By Range under
Setting Type .
Start
Frequency
Enter the frequency value at the beginning of the frequency range to
use. The frequency is increased in increments equal to the Step value
until the End Frequency is reached, at which time the cycle starts
over with the Start Frequency.
Note: This field only appears when you select By Range under
Setting Type .