ZyXEL Communications MAX318M2W, User Manual

Page: 33 / 294

Chapter 3 Setup Wizard
MAX318M2W User’s Guide
33
The following table describes the labels in this screen.
Table 8 Setup Wizard > LAN Settings
LABEL DESCRIPTION
LAN TCP/IP
IP
Address
Enter the IP address of the WiMAX Device on the LAN.
Note: This field is the IP address you use to access the WiMAX Device
on the LAN. If the web configurator is running on a computer on
the LAN, you lose access to it as soon as you change this field.
You can access the web configurator again by typing the new IP
address in the browser.
IP Subnet
Mask
Enter the subnet mask of the LAN.
DHCP Server
Enable Select this if you want the WiMAX Device to be the DHCP server on the
LAN. As a DHCP server, the WiMAX Device assigns IP addresses to DHCP
clients on the LAN and provides the subnet mask and DNS server
information.
Start IP Enter the IP address from which the WiMAX Device begins allocating IP
addresses.
End IP Enter the IP address at which the WiMAX Device stops allocating IP
addresses.
Lease
Time
Enter the duration in minutes before the device requests a new IP address
from the DHCP server.
DNS Server assigned by DHCP Server
First DNS
Server
Specify the first IP address of three DNS servers that the network can use.
The WiMAX Device provides these IP addresses to DHCP clients.
Second
DNS
Server
Specify the second IP address of three DNS servers that the network can
use. The WiMAX Device provides these IP addresses to DHCP clients.
Third
DNS
Server
Specify the third IP address of three DNS servers that the network can use.
The WiMAX Device provides these IP addresses to DHCP clients.
Back Click to display the previous screen.
Next Click to proceed to the next screen.