ZyXEL Communications MAX318M2W, User Manual

Page: 129 / 294

Chapter 8 Security
MAX318M2W User’s Guide
129
8.3 MAC Filter
Use this screen to allow ("whitelist") or block ("blacklist") connections to and from
specific devices on the network based on their unique MAC addresses.
Note: This feature only works when the WiMAX Device is in bridge mode.
Click Security > Firewall > MAC Filter to open this screen as shown next.
Figure 61 MAC Filter Screen
This screen contains the following fields:
Table 47 MAC Filter
LABEL DESCRIPTION
Blacklist/
Whitelist Select either whitelist or blacklist for viewing and editing.
Source MAC This displays the source MAC for the MAC filter rule.
Click Add to create a new, empty rule, then enter the incoming MAC
address for the WiMAX Device to block.
If you want to delete this rule, click the Delete icon.
Destination
MAC This displays the destination MAC for the MAC filter rule.
Click Add to create a new, empty rule, then enter the outgoing MAC
address for the WiMAX Device to block.
If you want to delete this rule, click the Delete icon.
Mon ~ Sun Select which days of the week you want the filter rule to be effective.
Start / End
Time Select what time each day you want the filter rule to be effective. Enter
times in 24-hour format; for example, 3:00pm should be entered as
15:00.
Add Click this to add a new filter rule.
OK Click this to save any changes made to the list.