ZyXEL Communications IES4005M, User Manual

Page: 23 / 236

Chapter 3 Management Cards
IES4005M User’s Guide
23
3.2 The MSC1002G Management Card
The MSC1002G management card aggregates the upstream service through active-active Gigabit
Ethernet optical or electrical connections, manages the IES, and manages the services of the line
cards. This card is hot-swappable.
3.2.1 MSC1002G Front Panel
The following figure shows the front panel of the MSC1002G management card.
Figure 7
MSC1002G Front Panel
This table describes the front panel LEDs of the card.
Table 3
MSC1401G Specifications
ITEM VALUE
Dimensions 130 mm (w) x 223 mm (D) x 42.4 mm (H)
Maximum Power
Consumption 41.1Watts
Weight 516g
Table 4
Management Switch Card LED Descriptions
LED COLOR STATUS DESCRIPTION
PWR Green On The management switch card is installed and receiving power from the main
chassis.
Off The management switch card is not receiving power from the main chassis.
SYS Green Blinking The system is initializing.
On The management switch card is on and functioning properly.
Off The management switch card is not receiving power, is not ready or has
malfunctioned.
ALM Red On An alarm has been detected on the IES. Examples of an alarm on the IES are
when the IES’s voltage or temperature is outside of the normal range.
Off The IES has not detected an alarm on itself.
MGMT Yellow Blinking The port is transmitting/receiving to/from a 100 Mbps Ethernet network.
On A 100 Mbps Ethernet link is up.
Off The Ethernet link is down.
Green Blinking The port is transmitting/receiving to/from a 10 Mbps Ethernet device.
On A 10 Mbps Ethernet link is up.
Off The Ethernet link is down.