ZyXEL Communications IES4005M, User Manual

Page: 190 / 236

Chapter 25 VLAN
IES4005M User’s Guide
190
25.6 VLAN Trunk Commands
VLAN Trunk configures “VLAN Tagging and Trunk mode”, and “Stacking VLAN Tagging and Trunk
mode” as described in
Section 25.1.2 on page 180 and Section 25.1.3 on page 180 .
The following table describes commonly used parameter notation for these commands.
This table describes the commands.
Table 132
VLAN Trunking Command Parameters
NOTATION DESCRIPTION
svid
The SVID (Service provider VLAN ID) 1-4093.
cvid
The CVID (Customer VLAN ID) 1-4093.
spbit
The service provider priority bit 0-7.
cpbit
The customer priority bit 0-7.
etype
The Ethernet type, 0000-ffff in hexadecimal.
uni-vid
The VLAN ID on the UNI (DSL) ports, 1-4093.
vpi
The VPI (Virtual Path Indicator) 0-255.
vci
The VCI (Virtual Channel Indicator) 32-65535.
Table 133
VLAN Trunking Commands Summary
COMMAND DESCRIPTION M P
interface dsl < slot/portlist >
Configures the specified DSL ports. C 13
exit
Leaves the DSL port configuration. C 13
vlan trunk uni-untag svlan
< svid > spbit < spbit > [cvlan
< cvid > cpbit < cpbit >]
Cross-connects untagged packets in the specified ports to the
specified S VLAN or S + C VLAN on uplink ports. C 13
no vlan trunk uni-untag
Removes the cross-connection of untagged packets on the specified
DSL ports. C 13
vlan trunk uni-untag ether-
type < etype > svlan < svid >
spbit < spbit > [cvlan < cvid >
cpbit < cpbit >]
Cross-connects untagged packets in the specified ports to the
specified S VLAN or S + C VLAN on uplink ports based on the ether-
type field. C 13
no vlan trunk uni-untag
ether-type < etype >
Removes the ether-type based cross-connection of untagged packets
on the specified DSL ports. C 13
vlan trunk uni-vlan < uni-
vid > [svlan < svid >]
Cross-connects uni-vid tagged packets in the specified DSL ports to
the S (uni-vid) VLAN if SVLAN is not specified or S (svid) + C (uni-vid)
on uplink ports if svlan is specified. C 13
no vlan trunk uni-vlan
< uni-vid >
Removes the cross-connection of the uni-vid tagged packets on the
specified DSL ports. C 13
vlan trunk atm-vc < vpi >/
< vci > uni-untag svlan
< svid > spbit < spbit > [cvlan
< cvid > cpbit < cpbit >]
Cross-connects untagged packets in the specified DSL ATM virtual
circuits to the specified S VLAN or S + C VLAN on uplink ports. C 13
no vlan trunk atm-vc < vpi >/
< vci > uni-untag
Removes the cross-connection of untagged packets in the specified
DSL ATM virtual circuits. C 13