ZyXEL Communications IES4005M, User Manual

Page: 176 / 236

Chapter 24 VDSL
IES4005M User’s Guide
176
xtur-15min-errcoding-
threshold < threshold >
Configures the number of Code Violations (incorrect cyclic
redundancy check) allowed on the subscriber devices within 15
minutes. 0- 2147483647, default: 0. C 13
xtur-15min-corrected-
threshold < threshold >
Configures the number of corrected error blocks allowed on the
subscriber devices within 15 minutes. 0- 2147483647, default: 0. C 13
no dsl line-template < name >
Removes the specified DSL line template. C 13
show dsl line-template [ name ]
Displays the names of all the DSL line templates if a name is not
specified or the contents of the specified DSL line template. E 13
dsl line-template < name >
Enters the sub-command mode for configuring the specified DSL
line template. C 13
exit
Leaves the DSL line template configuration sub-command mode. C 13
channel-profile < name >
Configures the referenced DSL channel profile. Default: DEFVAL C 13
line-profile < name >
Configures the referenced DSL line profile. Default: DEFVAL C 13
no dsl alarm-template < name >
Removes the specified DSL alarm template. C 13
show dsl alarm-template < name >
Displays the names of all the DSL alarm templates if a name is not
specified or the contents of the specified DSL alarm template. E 13
dsl alarm-template < name >
Enters the sub-command mode for configuring the specified DSL
alarm template. C 13
exit
Leaves the DSL alarm template configuration sub-command
mode. C 13
alarm-channel-profile < name >
Configures the referenced DSL alarm channel profile. Default:
DEFVAL C 13
alarm-line-profile < name >
Configures the referenced DSL alarm line profile. Default: DEFVAL C 13
interface dsl < slot/portlist >
Enters the sub-command mode for configuring the specified DSL
ports. C 13
exit
Leaves the DSL port configuration. C 13
active
Enables the specified DSL port(s) on the IES. C 13
no active
Disables the specified DSL port(s) on the IES. C 13
name < port-name-string >
Sets a name of up to 31 printable characters for the port(s).
default: C 13
line-template < line-template >
Configures the referenced DSL line template to the specified DSL
ports.
line-template
: up to 31 printable characters
C 13
alarm-template < alarm-
template >
Configures the referenced DSL alarm template to the specified
DSL ports.
line-template
: up to 31 printable characters, default is
DEFVAL
C 13
show interface dsl < slot/
portlist > config
Displays the DSL configuration of the specified DSL ports. E 13
show interface dsl < slot/
portlist > lineinfo
Displays the current 15 minutes DSL line information for the
specified DSL ports. E 13
show interface dsl < slot/
portlist > linerate
Displays the current 15 minutes DSL line rate for the specified
DSL ports. E 13
show interface dsl < slot/
portlist > status
Displays the current 15 minutes DSL line status for the specified
DSL ports. E 13
Table 116
VDSL Commands Summary (continued)
COMMAND DESCRIPTION M P