ZyXEL Communications IES4005M, User Manual

Page: 170 / 236

Chapter 24 VDSL
IES4005M User’s Guide
170
The following section lists the commands for this feature.
downshift-time
The rate adaption downshift time. 0-16383 in seconds, default: 30
target-snrm
The target Signal to Noise Ratio (SNR) margin. 0-310 in step of 0.1dB, default: 60
max-snrm
The maximum SNR margin. 0-310 in step of 0.1dB, default: 310
min-snrm
The minimum SNR margin. 0-310 in step of 0.1dB, default: 0
Table 115
VDSL Command Parameters (continued)
NOTATION DESCRIPTION
Table 116
VDSL Commands Summary
COMMAND DESCRIPTION M P
no dsl channel-profile < name >
Removes the specified DSL channel profile. C 13
show dsl channel-profile [ name ]
Displays the names of all the DSL channel profiles if a name is not
specified or the contents of the specified DSL channel profile. E 13
dsl channel-profile < name >
Enters the sub-command mode for configuring the specified DSL
channel profile. C 13
exit
Leaves the DSL channel profile configuration sub-command mode. C 13
rate-ds < max-rate > < min-rate >
Configures the maximum and minimum downstream rates. C 13
rate-us < max-rate > < min-rate >
Configures the maximum and minimum upstream rates. C 13
max-delay-ds < delay >
Configure the maximum downstream latency delay, 0-63 in ms. C 13
max-delay-us < delay >
Configure the minimum downstream latency delay. 0-63 in ms. C 13
min-inp-ds < min-inp >
Configures the downstream minimum Impulse Noise Protection
(INP) for a 4.3125 KHz carrier space DSL link. 0-32 C 13
min-inp-us < min-inp >
Configures the upstream minimum INP for a 4.3125 KHz carrier
space DSL link. 0-32 C 13
min-inp8-ds < min-inp >
Configures the downstream minimum INP for a 8.625 KHz carrier
space DSL link. 0-32 C 13
min-inp8-us < min-inp >
Configures the upstream minimum INP for a 8.625 KHz carrier
space DSL link. 0-32 C 13
phyr-ds enable|disable|auto
Configures PhyR (physical layer protection) for downstream
traffic. Turn it on or off or have the IES use it automatically. PhyR
has the same function as INP (Impulse Noise Protection) but is
more effective. C 13
phyr-us enable|disable|auto
Configures PhyR (physical layer protection) for upstream traffic.
Turn it on or off or have the IES use it automatically. PhyR has the
same function as INP (Impulse Noise Protection) but is more
effective. C 13
no dsl line-profile < name >
Removes the specified DSL line profile. C 13
show dsl line-profile [ name ]
Displays the names of all the DSL line profiles if a name is not
specified or the contents of the specified DSL line profile. E 13
dsl line-profile < name >
Enters the sub-command mode for configuring the specified DSL
line profile. C 13
exit
Leaves the DSL line profile configuration sub-command mode.