ZyXEL Communications IES4005M, User Manual

Page: 135 / 236

Chapter 16 Multicast
IES4005M User’s Guide
135
no igmp-mld proxy
Disables IGMP/MLD proxy. C 13
igmp-mld proxy-reporting
Enables IGMP/MLD proxy reporting. IGMP/MLD transparent,
snooping, proxy, and proxy-reporting can not enabled at the same
time. C 13
no igmp-mld proxy-reporting
Disables IGMP/MLD proxy reporting. C 13
igmp-mld version
igmpv2|igmpv3|mldv1|mldv2|igmpv2
+mldv1|mldv2|mldv1
|mldv2
Sets the IGMP/MLD protocol version.
igmpv2
IGMP version 2
igmpv3
IGMP version 3
mldv1
MLD version 1
mldv2
MLD version 2
C 13
igmp-mld leave-mode fast-
leave|last-member-query
Sets the IGMP/MLD leave message handling mode.
fast-leave
: leaves the joined group immediately
last-member-query
: sends a specific Query to check if any
hosts are still members
C 13
igmp-mld last-member-query timer
query-interval < interval >
robustness < robustness >
Configures last member query timers.
interval
: 100-1000 in ms, in step of 100
robustness
: 1-5
C 13
igmp-mld general-query timer
query-interval < interval >
robustness < robustness > max-
response-time < max-response-
time >
Configures general query timers.
interval
: 10-300 in seconds
robustness
: 1-5
max-response-time
: 1-10 in seconds
C 13
igmp-mld pbit < pbit >
Configures priority bit in proxy mode. C 13
show igmp-mld
Displays IGMP/MLD settings. E 13
igmp-mld group-privilege-profile
< profile-name > index < index >
Configures a group privilege entry for the specified group privilege
profile.
index
: the entry index 1-16
C 13
group-range < start-ip > < end-
ip >
Configures the group range.
start-ip
: 224.0.0.0-239.255.255.255 for IPv4 or ff00:: ~
ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff for IPv6
end-ip
: 224.0.0.0-239.255.255.255 for IPv4 or ff00:: ~
ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff for IPv6
C 13
privilege permit
Enables permit privilege for the groups. C 13
privilege forbid
Enables forbid privilege for the groups. C 13
privilege preview < length >
< interval > < count > < reset >
Enables preview privilege for the group and configures the
preview parameters.
length
: 10-300 in seconds
interval
: 10-300 in seconds
count
: 1-10
reset
: 30-86400 in seconds
C 13
Table 91
IGMP/MLD Commands Summary (continued)
COMMAND DESCRIPTION M P