ZyXEL Communications IES4005M, User Manual

Page: 116 / 236

Chapter 13 Switch Features
IES4005M User’s Guide
116
13.5 GE Uplink Commands
Use these commands to configure the Gigabit Ethernet uplink ports.
This table describes the commands.
Table 80
GE Uplink Commands Summary
COMMAND DESCRIPTION M P
show interface ge-nni < portlist >
Displays the configuration of the specified Gigabit Ethernet uplink
ports. You can specify a single port <1>, all ports <*> or a list of
ports <1,2>. You can also include a range of ports <1-2>. E 13
interface ge-nni < portlist >
Configures the specified Gigabit Ethernet uplink ports. You can
specify a single port <1>, all ports <*> or a list of ports <1,2>.
You can also include a range of ports <1-2>. C 13
exit
Leaves the Gigabit Ethernet uplink port configuration. C 13
inactive
Disables the Gigabit Ethernet uplink ports. C 13
no inactive
Enables the Gigabit Ethernet uplink ports. C 13
name < port-name-string >
Sets a name of up to 31 printable characters for the Gigabit
Ethernet uplink ports. C 13
no name
Resets the name of the port to the default. C 13
speed-duplex auto|10-
half|10-full|100-half|100-
full|1000-full|1000-fiber
Configures the Gigabit Ethernet port’s speed and duplex mode.
The default is
auto
.
auto
: auto negotiation
10-half
fixed to 10Base-T half duplex
10-full
fixed to 10Base-T full duplex
100-half
fixed to 100Base-TX half duplex
100-full
fixed to 100Base-TX full duplex
1000-full
fixed to 1000Base-T full duplex
1000-fiber
fixed to 1000Base-X full duplex
C 13
no speed-duplex
Resets the Gigabit Ethernet port’s speed and duplex mode to the
default. C 13
clear interface ge-nni < portlist >
performance
Clears the current or historical 15-minutes and 1-day interface
status for the specified Gigabit Ethernet uplink ports. You can
specify a single port <1>, all ports <*> or a list of ports <1,2>.
You can also include a range of ports <1-2>. E 13
clear interface ge-nni <portlist>
statistics
Clears packet statistics for the specified port. You can specify a
single port <1>, all ports <*> or a list of ports <1,2>. You can
also include a range of ports <1-2>. E 13
show interface ge-nni <portlist>
statistics
Displays packet statistics for the specified port. You can specify a
single port <1>, all ports <*> or a list of ports <1,2>. You can
also include a range of ports <1-2>. E 13
show interface ge-nni <portlist>
status
Displays the current interface status for the specified ports. You
can specify a single port <1>, all ports <*> or a list of ports
<1,2>. You can also include a range of ports <1-2>. E 13