Zurich 56218 Owner'S Manual Download Page 84

Page: 84 / 101

Additional Tests

BATTERY/ALTERNATOR MONITOR

For technical questions, please call 1-888-866-5797.

Select

Oil Reset

, then press

ENTER

The Oil Reset screen displays.

If the vehicle under test is equipped with a navigation system, choose

Yes

to continue.

If the vehicle under test is not equipped with a navigation system,
choose

to continue.

If the Scan Tool cannot reset the Oil Maintenance Light, an
“instructional” dialog displays, showing the manual
procedures for resetting the indicator light. When finished
viewing the instructions, press the

button to return to the

Main Menu.

The Select Reset Method screen

displays.

To perform the oil reset by procedure,

choose

View Procedure

An “instructional” dialog displays,

showing the manual procedures for

resetting the indicator light. When

finished viewing the instructions,

press the

button to return to the

Main Menu.

To perform oil reset by command,

choose

Perform Command

A “status” message displays while oil

reset is in progress.

When the reset process has competed,

a confirmation message displays.

Choose

Back

to return to the Main

Menu.

If the oil reset was not successful, an

advisory message displays.

To perform the oil reset by
procedure,

choose

View

Procedure

“instructional”

message displays, showing the
manual procedures for resetting the indicator light.

If you do not wish to perform the oil reset by procedure, choose

Exit

to return to the Main Menu.

Summary of Contents for 56218






































































































Search results

Summary of Contents for 56218

Reviews:

Related manuals for 56218

Brands by name

Popular brands

Zurich 56218, Owner'S Manual

Search results

Summary of Contents for 56218

Reviews:

Related manuals for 56218

Brands by name

Popular brands